Swellpro Spry Fisher Bundle
The Swellpro Spry Fishermans Bundle by Ultimate Drone Fishing is a great value pack to get your started on your drone fishing journey. This bundle comes with 2 extra batteries, 1 extra set of performance propellers, 1 x membrane kit, 1 xspare optical glass and a SkyClip bait release mechanism. Record stunning 4K video at 30 frames per second and a max bit rate of 64 mbps or take crisp 12MP photos with the fully water sealed camera.
The Swellpro Spry+ may be a compact unit but you don’t have to swap size for quality, this amazing drone has an onboard camera that utilizes a Sony ½.3” CMOS sensor, paired with a lens that minimises fisheye distortion for natural looking images. With Spry+ you can record stunning 4K video or take 12MP photos of your drone fishing action.
Swellpro Spry+ is engineered to be waterproof and buoyant and is purposefully built for action in harsh marine environments, it has specially coated motors and is constructed from corrosion resistant materials.
This fully waterproof drone and remote controller when paired with a bait release module gives the DJI Mavic a run for its money, and when used for drone fishing you won’t have to worry if it goes for a swim!
– Drop us an email anytime or call us on 1300 DROP IT if you need additional assistance.
The Swellpro Spry Drone is the compact waterproof drone that the action sports community has been waiting for.
- Compact and portable
- Completely waterproof
- Real 4K camera
- Easy to fly and highly agile
- Automatic follow me/Automatic Orbit modes
- Return to moving boat
The Spry Sports drone is waterproof and buoyant. Engineered with specially coated motors and corrosion resistant materials throughout to ensure optimal performance in the marine landscape.
Now featuring it’s first ever waterproof controller meaning that you can now operate this superstar sports drone in the rain and seaspray.
Good things come in small packages and the Swellpro Spry Sports drone proves it. Being small doesn’t mean you have to compromise image quality. The Spry’s onboard camera utilizes a Sony 1/2.3” CMOS sensor paired with a lens that minimizes fisheye distortion for natural looking images.
With the Spry Sports drone, record stunning 4K video at 30 frames per second and a max bit rate of 64mbps, or take crisp 12MP photos.
Wanting to get some action footage? The auto follow-me function is now smarter and more sensitive. The Spry drone will follow you at a set distance and height – whether you are moving forward or backward, leading or chasing. The camera always keeps you in the frame – no matter where your next move is.
Spry Drone Enhanced Control Features;
- One key launch
- Tap to fly
- Orbit flights
- Auto-return home
- Autonomous navigation
High-thrust motors and high-power ESCs push the speed limit of the Spry to over 70 KM/H in manual mode.
Brilliant for capturing all the action whether you are surfing, kayaking, wakeboarding, jet skiing, boating or more.
Ultimate Drone Fishing stocks a range of super cool accessories for this fantastic sports drone and you can check them out by clicking here.
The Swellpro Spry Sports Drone is also available on a Humm interest free repayment plan through ultimatedronefishing.com
I just bought the Spry. I have an iPad. The Spry manual references a “Spry App” that work for iOS. How do I get this App? It is not in the App Store?
Spry app doesn’t support iPad.
I have a new Spry. I completed the calibrations but the remote is taking and usually long time to initialize, so long that I had to plug in the remote because the battery was low. Is that normal? Please advise.
For the first calibration, the initialize time might be longer (about 3minutes). If after 5minutes still can’t initialize, that’s mean there is jitter or shake in the calibration area. Change a static place to do the calibration.
If the problem hasn’t been solved yet, please send us short video of the screen. We can identify what is the problem easily with the OSD display.
I have recently received my new Spry drone and trying to get started with it. I am struggling getting passed the initial set up, the control is saying that I have lost RC Signal. Please contact me with a solution or guidance to overcome this problem. I see nothing I the manual.
Pair the drone again (refer manual page18)
I tried the follow me function. This did not do anything. Drone was just hovering in the same place. After turning Remote Control off, the drone was reaction really slow and I had to power on and off to fix this.
Sometimes, when the drone or remote control is unilaterally shut down and connected again, it may be found that the response is slow, because 2.4 GH signal got interference and the synchronization of signals is problematic. At this time, restart the drone, or the remote control, the problem will be solved.
First try to land and start in the water failed. After landing in water the drone had a gyro issue. After landing in the water I tried to start again. But nothing happened, in the remote there was something like “gyro calibration” displayed.
When the drone lands on the water, it will show gyro calibration at a certain wave frequency, but it will be able to unlock and take off later. Because the gyro detection frequency is just at that point. This situation is relatively rare.
What is the most recommend video mode.
The default setting is 2.7K/60fps, and EIS on. You can use the APP to disable the EIS to try.
Is your drone & controller update software available for Mac OSX as I do not own a Windows PC.
The update software only runs on Windows PC. Go to download page (https://www.swellpro.com/download.html) to download the manual to get the instruction manual.
With the remark that holding it’s position was a challenge i started in the ATTI mode then switched over to GPS which did not much improve stability. I had at the end 12 satellites but even then it did not maintain its height going up and down more then 5 till 10 meters if not correcting.
Check #1: The function of membrane is to prevent water from entering the drone and to make the barometer inside the aircraft work properly. If the membrane is dirty, it will cause the barometer to work abnormally. Please take out the battery cover to try. If the drone become normal, that’s mean you should change the membrane.
Sometimes, my Spry drone has moisture problem for the dome and remote screen.
For the camera dome moisture problem, we seldom see this but it is possible if the drone has been opened in moist air environments. You have two fast ways to solve this problem:
1, Fast way is: open the battery cover, let the heat and moisture air inside the drone goes out;
2. You can take out the dome over off by carefully removing the two retaining screws and let the drone and dome dry out in a dry environment. Then put back the dome and fix it with the two screws, being very careful that the seal remains in place and does not get kinked. It should solve the problem.
For the remote controller, you can also open the USB plug seal in a dry environment and this will allow the moist air to dissipate. If there is big water drop inside, you can’t clean it however. Contact us or the nearest maintenance point for screen protection plate to replace. Or you can use a knife to open the screen protection plate, clean it and use some glue to seal the edge. Just not allow moisture air enter the screen front.
Is this drone capable of take-off and landing on the sea (saltwater)…
Yes, all our products are designed to work on the sea (saltwater)….
There is an issue where spry will not arm if crashed into water sometimes. “IMU Calibration request” is displayed in FPV and have to swim to recover it and reboot.
This is normal. When the drone have heavy shake, the GYRO need around 1minute to recover.
I crashed my drone for unknown reason. What should I do?
Don’t fly again, go to Swellpro download page to download the flight log tool and instruction manual to get the flight log and send to us, we will study and tell you what happened on your drone.
What does rc signal lost mean on the spry? How to fix?
The drone and controller need to re-pair. Check Page18 in the manual.
My Spry is crash, I think I didn’t do wrong. What can I do?
Please go to our download page to download the SpryLogTool and the operation manual. Send us the log file to study. We will give you reply asap.
My Spry drone get water inside. What should I do?
Clarify: Every drone is waterproof tested before shipping out. Seal it properly before fly, water won’t get in, that’s for sure.
If it is only few drop of water, you can just put it upside down, and let it dry; If there’s a lot of water in it. You might need contact our service center and send the drone body to study. But probably all the electronics inside is damaged. You might need to replace all the electronics or buy a new Spry drone body.
Waterproof Level: Surface Buoyant
Axis Diameter 270mm
Size (Length x width x height): 233.5 x 249 x 90mm
Weight: 538g (Battery excluded)
Brushless Motors: 2206 1400KV
Brushless ESC: 30A
Battery: 3S 3600mAh LiHV battery
Battery Weight: 220g
Charging Time: About 90mins
Image Transmission Channels: 5.8G 8CH
Image Transmission Range: ~500m
Flight Time: 15~17 mins
Max Flying Range: 800m from remote controller
Max Flying Altitude: 200m
Max Flying Speed: 18m/s
Max Ascend Speed: 4m/s
Max Follow Me Speed: 10m/s
APP Control: Automatic takeoff, automatic hover, automatic return home, point to fly, circling flight, flight path setting, camera control
Hovering Accuracy: ±0.5m
Wind Resistance: >10m/s
Working temperature -10C°~ 40C°
Surface Buoyant: Surface Buoyant
Weight: 500g (Battery included)
Control Range: 800m
Receiving sensitivity: (1%PER)-105dbm
Working Current: 120 mA
Battery Capacity: 2S 2300mAh LiPo
Charging Time: About 90mins
Frequency Band: 5645 ~ 5965HMZ
Image reception channels 8
Screen Size: 4.3 inch
Resolution: 800 x 480 Pixels
Brightness: 600 cd/m²
Image Sensor: 2.3”CMOS, 12M
Lens: F4.53mm f/2.65
ISO Range: 100-1600
Photo Resolution: 12MP (16:9)
Video Resolution: 3840 * 2160 30P，2704×1524 30P，1920 * 1080 30P / 60P / 120P，1280 * 720 240P
Max Video Bit Rate: 64mbps
Picture Format: JPEG
Video Format: MOV MP4
Storage: Class 10 or UHS-1 and above specifications Micro SD card with max 64GB