USAGE AND MAINTENANCE OF SKYCLIP PRODUCTS
Welcome to the fastest growing and exciting Hobby of Drone Fishing. We hope you enjoy using our exciting range of High Performance Bait Release Products which will help you in your Drone Fishing Adventures. We strive to keep your Drone Safe above all while you can focus on fishing and capturing Predator fish without stressing about losing your Drone, so please read the following instructions carefully.
INSTRUCTIONS FOR USING THE SKYCLIP ON YOUR DRONE.
Attach the SkyClip onto the Drone belly or landing gear, depending on the Drone you have purchased it for and strap on the O-rings to lock it in place.
Insert the DROP LOOP line in the ball slot of the Bait release until it locks in place. Please make sure to use 0.70mm Drop loop line thickness from 50cm to 3m length.
Take-off the Drone and reach a defined safety height of 20 meters above sea level – usually and after having baited the hooks. Do not forget to OPEN the bail arm of your reel or loosen the drag before flying out your baits.
Fly the Drone out over the water at High speed and make sure that your line does not touch the water during the flight.(Keep the line taught during flight – hold it in your hand lightly and let it slide through your fingers for better control)
Once you reach the distance that you want to drop your bait, just close the bail arm of your reel, or brake the reel unwinding with your hand so that the line stops unreeling but DO NOT slow down the drone and keep the speed constant so the line will release automatically.
Finally bring back the Drone to Shore. Always follow the same procedure.
MAINTENANCE IS MOST IMPORTANT
Fly the Drone out over the water at High speed and make sure that your line does not touch the water during the flight.(Keep the line taught during flight – hold it in your hand lightly and let it slide through your fingers for better control)
Once you reach the distance that you want to drop your bait, just close the bail arm of your reel, or brake the reel unwinding with your hand so that the line stops bailing out but DO NOT slow down the drone and keep the speed constant so the line will release automatically.
Finally bring back the Drone to Shore. Always repeat the same procedure.
MAINTENANCE IS MOST IMPORTANT
In order to be entitled to the 2 year warranty and enjoy your product for many years to come, you must follow these maintenance guidelines ALWAYS.
All SkyClip Tension release mechanisms are made from marine grade Stainless Steel and will not rust or corrode and are expected to last for many years, but this does not mean that maintenance is not required.
Like any other parts which are often exposed to salt water environments it is mandatory after every fishing trip and before storing the SkyClip to wipe off the ball slot mechanism with a moist cloth rinsed in freshwater and make sure it is dry. You can then lubricate the ball slot with a small quantity of anti-corrosion spray or a fine machine oil for added protection and smooth release action.
If these procedures are not followed the Stainless Steel parts might react with the salt left on the mechanism and form a thin film and degrade release precision which has been calibrated from the factory, and furthermore void your warranty caused by prolonged exposure to salt water environments.
Specifications
BODY – SLS MANUFACTURED 3D PRINTED POLYAMIDE
BALL BEARING MECHANISM – STAINLESS STEEL 316AL
TENSION SETTINGS – 5% ACCURACY
PRODUCT WARRANTY 2 YEARS
Manufactured in Greece by UAV Electronics
Page www.facebook.com/skyclip.eu
